This is the right place to order your custom-fitted leather moccasins. These are minimalist/barefoot moccasins made out of high quality bull-calf leather. They are not finished yet because i custom-fit them to your size. The shoe is made of a single piece of leather and do not have any plastic or rubber sole. In fact, you will have similar sensations as if you were walking barefoot while being well protected from rocky, pointy, sharp, prickly or burning/cold grounds at the same time. Even though they are closed shoes, the fact that they are 100% leather gives them very good qualities in terms of breathability and temperature regulation. This is why we like to wear them without socks (except in the winter). They are suitable to wear indoors and outdoors and are water-resistant although they are not recommended for cold and wet weather. In all cases, they will benefit from a regular coat of leather treatment. The soft bull-calf leather i use is 2 mm thick. You will easily be able to walk several months (outdoors) before needing to resoled them with leather or thin rubber crepe (see my tutorial: how to make sole and extra leather for sole). If you wear them outdoors on a regular basis, they will usually need to be resoled once to 4 times a year in rough landscapes. They can be resoled as many times as needed over time and if well taken care of, a pair can last for many years. If you keep them for indoors they could withstand decades. Generally speaking, these are suitable for feet from unisex size 40-44 eu / 9-11 us. Can be longer if your foot is thin. This design is recommended if you have a high arch and/or if you want a wider toe-box. Since each person have different feet, i will ask you for a few measurements and pictures of your feet. This will enable me to fit them as close as possible to your feet so that they can become a bit like a second skin. Within the first week of wearing them, the leather will also stretch a little to perfect the fitting. This item is made of leather.

This is the right place to order your custom-fitted leather moccasins. These are minimalist/barefoot moccasins made out of high quality bull-calf leather. They are not finished yet because i custom-fit them to your size. The shoe is made of a single piece of leather and do not have any plastic or rubber sole. In fact, you will have similar sensations as if you were walking barefoot while being well protected from rocky, pointy, sharp, prickly or burning/cold grounds at the same time. Even though they are closed shoes, the fact that they are 100% leather gives them very good qualities in terms of breathability and temperature regulation. This is why we like to wear them without socks (except in the winter). They are suitable to wear indoors and outdoors and are water-resistant although they are not recommended for cold and wet weather. In all cases, they will benefit from a regular coat of leather treatment. The soft bull-calf leather i use is 2 mm thick. You will easily be able to walk several months (outdoors) before needing to resoled them with leather or thin rubber crepe (see my tutorial: how to make sole and extra leather for sole). If you wear them outdoors on a regular basis, they will usually need to be resoled once to 4 times a year in rough landscapes. They can be resoled as many times as needed over time and if well taken care of, a pair can last for many years. If you keep them for indoors they could withstand decades. Generally speaking, these are suitable for feet from size 39-43 eu / 8-11 us. Can be longer if your foot is thin. This design is not recommended if you have a high arch and if you want a wider toe-box, we recommend the “leaf” (two-colored) style listings. Since each person have different feet, i will ask you for a few measurements and pictures of your feet. This will enable me to fit them as close as possible to your feet so that they can become a bit like a second skin. Within the first week of wearing them, the leather will also stretch a little to perfect the fitting. This item is made of leather.

This is the right place to order your custom-fitted leather moccasins. These are minimalist/barefoot moccasins made out of high quality bull-calf leather. They are not finished yet because i custom-fit them to your size. The shoe is made of a single piece of leather and do not have any plastic or rubber sole. In fact, you will have similar sensations as if you were walking barefoot while being well protected from rocky, pointy, sharp, prickly or burning/cold grounds at the same time. Even though they are closed shoes, the fact that they are 100% leather gives them very good qualities in terms of breathability and temperature regulation. This is why we like to wear them without socks (except in the winter). They are suitable to wear indoors and outdoors and are water-resistant although they are not recommended for cold and wet weather. In all cases, they will benefit from a regular coat of leather treatment. The soft bull-calf leather i use is 2 mm thick. You will easily be able to walk several months (outdoors) before needing to resoled them with leather or thin rubber crepe (see my tutorial: how to make sole and extra leather for sole). If you wear them outdoors on a regular basis, they will usually need to be resoled once to 4 times a year in rough landscapes. They can be resoled as many times as needed over time and if well taken care of, a pair can last for many years. If you keep them for indoors they could withstand decades. Generally speaking, these are suitable for feet from size 34-37 eu / 4-7 us. Can be longer if your foot is thin. This design is recommended if you have a high arch and/or if you want a wider toe-box. Since each person have different feet, i will ask you for a few measurements and pictures of your feet. This will enable me to fit them as close as possible to your feet so that they can become a bit like a second skin. Within the first week of wearing them, the leather will also stretch a little to perfect the fitting. This item is made of leather.

This is the right place to order your custom-fitted leather moccasins. These are minimalist/barefoot moccasins made out of high quality bull-calf leather. They are not finished yet because i custom-fit them to your size. The shoe is made of a single piece of leather and do not have any plastic or rubber sole. In fact, you will have similar sensations as if you were walking barefoot while being well protected from rocky, pointy, sharp, prickly or burning/cold grounds at the same time. Even though they are closed shoes, the fact that they are 100% leather gives them very good qualities in terms of breathability and temperature regulation. This is why we like to wear them without socks (except in the winter). They are suitable to wear indoors and outdoors and are water-resistant although they are not recommended for cold and wet weather. In all cases, they will benefit from a regular coat of leather treatment. The soft bull-calf leather i use is 2 mm thick. You will easily be able to walk several months (outdoors) before needing to resoled them with leather or thin rubber crepe (see my tutorial: how to make sole and extra leather for sole). If you wear them outdoors on a regular basis, they will usually need to be resoled once to 4 times a year in rough landscapes. They can be resoled as many times as needed over time and if well taken care of, a pair can last for many years. If you keep them for indoors they could withstand decades. Generally speaking, these are suitable for feet from unisex size 40-44 eu / 9-11 us. Can be longer if your foot is thin. This design is recommended if you have a high arch and/or if you want a wider toe-box. Since each person have different feet, i will ask you for a few measurements and pictures of your feet. This will enable me to fit them as close as possible to your feet so that they can become a bit like a second skin. Within the first week of wearing them, the leather will also stretch a little to perfect the fitting. This item is made of leather.

This is the right place to order your custom-fitted leather moccasins. These are minimalist/barefoot moccasins made out of high quality bull-calf leather. They are not finished yet because i custom-fit them to your size. The shoe is made of a single piece of leather and do not have any plastic or rubber sole. In fact, you will have similar sensations as if you were walking barefoot while being well protected from rocky, pointy, sharp, prickly or burning/cold grounds at the same time. Even though they are closed shoes, the fact that they are 100% leather gives them very good qualities in terms of breathability and temperature regulation. This is why we like to wear them without socks (except in the winter). They are suitable to wear indoors and outdoors and are water-resistant although they are not recommended for cold and wet weather. In all cases, they will benefit from a regular coat of leather treatment. The soft bull-calf leather i use is 2 mm thick. You will easily be able to walk several months (outdoors) before needing to resoled them with leather or thin rubber crepe (see my tutorial: how to make sole and extra leather for sole). If you wear them outdoors on a regular basis, they will usually need to be resoled once to 4 times a year in rough landscapes. They can be resoled as many times as needed over time and if well taken care of, a pair can last for many years. If you keep them for indoors they could withstand decades. Generally speaking, these are suitable for feet from unisex size 37-39 eu / 6-8 us. Can be longer if your foot is thin. This design is recommended if you have a high arch and/or if you want a wider toe-box. Since each person have different feet, i will ask you for a few measurements and pictures of your feet. This will enable me to fit them as close as possible to your feet so that they can become a bit like a second skin. Within the first week of wearing them, the leather will also stretch a little to perfect the fitting. This item is made of leather.

This is the right place to order your custom-fitted leather moccasins. These are minimalist/barefoot moccasins made out of high quality bull-calf leather. They are not finished yet because i custom-fit them to your size. The shoe is made of a single piece of leather and do not have any plastic or rubber sole. In fact, you will have similar sensations as if you were walking barefoot while being well protected from rocky, pointy, sharp, prickly or burning/cold grounds at the same time. Even though they are closed shoes, the fact that they are 100% leather gives them very good qualities in terms of breathability and temperature regulation. This is why we like to wear them without socks (except in the winter). They are suitable to wear indoors and outdoors and are water-resistant although they are not recommended for cold and wet weather. In all cases, they will benefit from a regular coat of leather treatment. The soft bull-calf leather i use is 2 mm thick. You will easily be able to walk several months (outdoors) before needing to resoled them with leather or thin rubber crepe (see my tutorial: how to make sole and extra leather for sole). If you wear them outdoors on a regular basis, they will usually need to be resoled once to 4 times a year in rough landscapes. They can be resoled as many times as needed over time and if well taken care of, a pair can last for many years. If you keep them for indoors they could withstand decades. Generally speaking, these are suitable for feet from size size 34-37 eu / 4-7 us. Can be longer if your foot is thin. This design is not recommended if you have a high arch and if you want a wider toe-box, we recommend the “leaf” (two-colored) style listings. Since each person have different feet, i will ask you for a few measurements and pictures of your feet. This will enable me to fit them as close as possible to your feet so that they can become a bit like a second skin. Within the first week of wearing them, the leather will also stretch a little to perfect the fitting. This item is made of leather.